Konica Minolta bizhub 215 bizhub 215 Copy Operations User Guide - Page 61
Making copies on envelopes
View all Konica Minolta bizhub 215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4.5 Making copies on various types of paper 4 4.5.3 Making copies on envelopes As an example, this section describes procedures for loading envelopes into the Bypass Tray and copying the original on them. Tips - Measure the size of originals or paper of custom size before loading them. It will be convenient to use the Original Scale. 1 Load the original. % For details on how to load the original, refer to page 3-11. 2 Adjust the guide of the Bypass Tray, and load envelopes. % Load the envelopes with the flap side up as shown in the illustration, so that the side on which you want to copy the original is facing down. % When loading envelopes, expel air from the envelopes, then hold the folds of the envelopes. % Up to 10 envelopes can be loaded into the Bypass Tray. Do not load the envelopes up to the point where the top of the stack is higher than the + mark. % For details on how to enter the size, refer to page 4-16. A screen for paper setup appears. 3 Use +, to select [TYPE], then press ). 4 Use +, to select [ENVELOPE], then press OK. 5 Press Back to return to the basic screen. 6 Configure other desired settings. % For details on the basic functions, refer to page 4-2. % For details on the Application, refer to page 5-2. 7 Press the Start key. bizhub 215 4-18