Konica Minolta bizhub 36 bizhub 36/42 Print Operations User Guide - Page 17
Interfaces used for connection, Ethernet, USB interface, Connection diagram
View all Konica Minolta bizhub 36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2.2 Operating environment 2 2.2.2 Interfaces used for connection To connect this printing system to a computer, the following interfaces can be used. Ethernet Use this interface to use this printing system via a network connection. It supports 1000Base-T, 100Base-TX, and 10Base-T standards. In addition, TCP/IP (LPD/LPR, IPP, SMB), Web services, IPX/SPX (NetWare), AppleTalk (EtherTalk) protocols are supported. USB interface Use this interface to use this printing system via a USB connection. A USB cable is required for connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring three meters or less is recommended. Connection diagram The printer cables are connected to each port on this machine. Back side of the machine 1 2 1. USB port 2. Ethernet port (1000Base-T/100Base-TX/10Base-T) bizhub 42/36 2-7