Konica Minolta bizhub C20/C20X bizhub C20 Printer/Copier/Scanner User Guide - Page 196

3 Use the keypad to type in the search keyword (maximum of 10 charac- ters), and then press the Select key. The search begins, and the search results appear after a while. If no data matches the search keyword, NOT FOUND appears for about two seconds. " For details on entering/editing text, refer to "Entering Text" on page 323. " Text starting with the first character of the maximum 10 characters is searched for. Text will not be found if the search keyword is in the middle of a word. 4 Press the + or , key to select the desired data, and then press the Select key. " To narrow down the search results, press the Back key, and then perform step 3 again. 5 Press the Select key again. If an FTP address or an SMB address was selected, the destination address is specified. 6 If an e-mail address was selected, press the + or , key to select FIN- ISH, and then press the Select key. " To add an additional e-mail address, select ADD in step 6, and then specify the destination. When sending the data to an FTP address or SMB address, multiple addresses cannot be specified. To check the specified e-mail address, select CHECK/EDIT in step 6. To delete an address, select CHECK/EDIT in step 6, and then continue with step 2 of "Deleting a Specified Destination Address". Searching an LDAP Server The destination e-mail address where the scan data is to be sent can be specified by using information on the LDAP server. " To connect to an LDAP server, settings for LDAP SETTING must be specified. For details, refer to the Reference Guide on the Documentation CD/DVD. " A maximum of 16 addresses (total of addresses from direct input and an LDAP search) can be specified. " If anonymous access is used to search for information on an LDAP server, the correct search results may not be retrieved. 182 Scanning With the Machine