Konica Minolta bizhub C20/C20X bizhub C20 Printer/Copier/Scanner User Guide - Page 303
PC CONNECTION FAILED, COMMUNICATION ERROR, USB Memory, xxx Server, DISCONNECT, Fuser Unit Life
View all Konica Minolta bizhub C20/C20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
This message... means... Do this... PC CONNECTION FAILED While data was Check the connection being sent in Scan with the computer and mode, the connec- the scanner driver sta- tion to the computer tus, and then try send- was interrupted. ing the data again. COMMUNICATION ERROR USB Memory While data was Check the connection being sent in Scan to the USB memory mode, the connec- device, and then try tion to the USB sending the data memory device was again. interrupted. COMMUNICATION ERROR xxx Server While data was being sent in Scan mode, the connection to the server was interrupted. Check the settings in the NETWORK SETTING menu, and then try sending the data again. DISCONNECT USB Memory The connection to the USB memory device was interrupted. Check the connection to the USB memory device, and then try sending the fax again. DISCONNECT xxx Server The connection to Check the settings in the server was inter- the NETWORK SET- rupted. TING menu, and then try connecting again. Fuser Unit Life The time to replace Replace the fuser unit. the fuser unit has been reached. HOLD JOB ERROR UNABLE TO STORE JOB The hard disk kit is To store jobs, install not installed on the the optional hard disk machine so a job to kit on the machine. be stored could not be received. HOLD JOB ERROR MEMORY FULL Since the memory is Create free space on full, stored jobs can- the memory, and then not be printed. try printing the stored jobs again. HOLD JOB ERROR NO TRAY3 Since Tray 3 is not installed, stored jobs cannot be printed. To print the jobs, install Tray 3, and then try printing the stored jobs again. Status, Error, and Service Messages 289