Konica Minolta bizhub C20/C20X bizhub C20 Printer/Copier/Scanner User Guide - Page 292
For Booklet Left Binding and Booklet, Envelope DL, Enve
View all Konica Minolta bizhub C20/C20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Symptom Cause Solution Booklet Left and Right Binding output is incorrect. Both the printer driver For Booklet Left Binding and Booklet and the application Right Binding, choose Collate only in have been set for col- the printer driver's Basic Tab. Do not lation. set collation in the application. You hear unusual noises. The machine is not level. The tray is not installed correctly. Place the machine on a flat, hard, level surface. Remove the tray that you are printing from and reinsert it completely into the machine. There is a foreign object stuck inside the machine. Turn off the machine and remove the object. If you cannot remove it, contact Technical Support. When copy- A malfunction may ing or scan- have occurred while ning with the paper was being ADF, a band transferred with the appears at ADF. the end of the image or paper (5 to 6 mm). If a band appears in the copy after copying, select a copy density setting that is one level darker. If a band appears in the image after scanning, scan using the original glass. Cannot copy Envelope DL, Enve- Place the document on the original with the ADF. lope Monarch, or glass. With the Envelope DL size, Envelope C6 is set to some areas may not be copied. the ADF. While scan- Immediately after the If the image becomes lighter or darker, ning with the machine is turned on, scan using the original glass. In addi- ADF at 600 the lamp intensity tion, perform the scan operation after dpi, the increases. There- turning the machine on and lighting the image has fore, the image may lamp for an hour and a half or more. become become lighter and lighter and the background may the back- become darker. ground has become darker. Scanned images are noisy. Resolution is set to 150 x 150 dpi while the scan mode is set to MIX or TEXT. Set the scan mode to PHOTO. 278 Solving Other Problems