Konica Minolta bizhub C20/C20X bizhub C20 Printer/Copier/Scanner User Guide - Page 49

KEY SPEED TIME TO Setting START 0.1sec / 0.3sec / 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec Specify the length of time until the cursor begins to move continuously when a key is held down. INTERVAL Setting 0.1sec / 0.3sec / 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec Specify the length of time until the cursor continuously moves between settings or characters. LANGUAGE Setting ENGLISH / FRENCH / GERMAN / ITALIAN / SPANISH / PORTUGUESE / RUSSIAN / CZECH / SLOVAK / HUNGARIAN / POLISH Select the language of the menus and messages that appear in the message window. LAMP OFF TIME Setting MODE1 / MODE2 Select the length of time until the scanner unit lamp goes off when no operation is performed. If MODE1 is selected, the lamp goes off when the machine enters Preheat mode. LAMP WARMUP TIME If MODE2 is selected, the lamp goes off when the machine enters Energy Save mode. Setting AUTO / FIX Specify the warm-up time for the lamp of the scanner unit. If AUTO is selected, the length of time to recover from Energy Save mode when the machine is turned on is adjusted according to the room temperature. Since the machine cannot be used until its condition is completely stabilized, select this setting, for example, if you wish to scan at a high image quality from the first page. If FIX is selected, the machine can be used after lamp warm-up is finished. With a low room temperature, the quality of the first page of a copy or scanned image may not be as good as if AUTO was selected. Configuration Menu Overview 35