Kyocera 2035 User Guide - Page 13

2 BATTERY Your phone comes with an internal/ removable lithium ion (LiIon) battery. The battery is partially charged when you receive the phone. Before using your phone, fully charge the battery. Connect the AC Adapter to the proper jack on the bottom of the phone as shown below, then connect the adapter's plug to a wall outlet. Note-You must have at least a partial charge in the battery to make or receive calls, regardless of whether or not the AC Adapter is connected to the phone. The battery icon is animated as the battery is charging. The battery is fully charged when the battery icon looks like . You can safely recharge the battery at any time, even if it has a partial charge. Power-save mode Your phone switches to power-save mode after several unsuccessful attempts to locate a signal. When the phone is in power-save mode, you cannot make or receive calls, and "Power Save Mode" and appear on the screen. Press any key to exit. Battery guidelines • Do not disassemble, puncture, or short-circuit the battery. • If you have not used the battery for more than a month, recharge it before using your phone. • Avoid extreme temperatures, direct sunlight, and high humidity. • Never dispose of any battery in or near a fire. It could explode. Important If the battery is expired or not installed in the phone, you may not be able to make an analog call. If you experience this User's Guide for the QCP 2035 Phone 7