Kyocera 2035 User Guide - Page 7

1 GETTING STARTED Installing the battery 1. Hold the phone face down in your palm with the antenna pointing down. Place your thumb on the ridges of the battery door. Push down with your thumb and slide the door away from you until it stops (about 1/2 inch or 1.27 centimeters). 2. Move your thumb to the side of the phone, then slide the door off the phone. 3. Place the battery with the metal contacts facing down and towards the bottom of the phone. 4. Lay the keypad flat inside the faceplate. Align the slots in the phone to the posts on the faceplate, and close until they are latched together. 5. Place the phone face down on a flat surface. Align the battery door to the grooves on the side of the phone. Slide the battery door on while pressing down firmly, ensuring that the battery door clicks into place. Check and repeat if the battery door is not aligned. Do not force. Note-Before using your phone, fully charge the battery (see page 7). User's Guide for the QCP 2035 Phone 1