Kyocera TASKalfa 620 Scan System (H) Operation Guide (Setup Edition) - Page 13
Connecting the scanner to your computer network, Caution, Important
![]() |
View all Kyocera TASKalfa 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Set-up Connecting the scanner to your computer network Caution ALWAYS turn the main power switch to the scanner OFF BEFORE connecting the network cable. 1 Turn the main power switch located on the rear left of the scanner OFF ( ). 2 Connect a 10BASE-T or 100BASE-TX cable to the scanner interface connector located on the rear right of the scanner. Important! 3 NEVER attempt to remove the Scanner Interface Card. Turn the main power switch to the scanner back ON ( | ). 5
![](/manual_guide/products/kyocera-taskalfa-620-scan-h-operation-guide-setup-edition-d6f8b2d/13.png)
Set-up
5
Connecting the scanner to your computer network
Caution
ALWAYS turn the main power switch to the scanner OFF BEFORE connecting the network cable.
1
Turn the main power switch located on the rear left of
the scanner OFF (
).
2
Connect a 10BASE-T or 100BASE-TX cable to the
scanner interface connector located on the rear right of
the scanner.
Important!
NEVER attempt to remove the Scanner Interface Card.
3
Turn the main power switch to the scanner back ON
( | ).