Lantronix MatchPort b/g MatchPort b/g - User Guide - Page 56
Send the Escape Sequence (+++) in Modem Mode, Show IP addr after 'RING', Auto Increment Source Port
View all Lantronix MatchPort b/g manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
5: Configuration via Serial Mode or Telnet Port Modem Mode Command ATD0.0.0.0 ATD or ATDT ATDx.x.x.x ATH ATS0=n ATEn ATVn Function Forces the unit into Monitor Mode. Uses remote IP address and port settings to initiate a connection. Forces the unit into Monitor Mode. Uses remote IP address and port settings to initiate a connection. Makes a connection to an IP address (x.x.x.x) and the remote port number defined within the unit. Hangs up the connection (Entered as +++ ATH). Enables or disables connections from the network going to the serial port. n=0 disables the ability to make a connection from the network to the serial port. n=1-9 enables the ability to make a connection from the network to the serial port. n>9 is invalid. Enables or disables character echo and responses. n=0 disables character echo and responses. n=1 enables character echo and responses. Enables numeric response or full verbose. n=0 enables numeric response. n=1 enables full verbose. Note: The unit recognizes these AT commands as single commands such as ATE0 or ATV1; it does not recognize compound commands such as ATE0V. Send the Escape Sequence (+++) in Modem Mode Send '+++' in Modem Mode (Y) ? _ Disable or enable the MatchPort's ability to send the escape sequence. The default is Y (Yes) (send the escape sequence). Show IP addr after 'RING' Show IP addr after 'RING' (Y) ? Disable or enable the MatchPort's ability to show the IP address after RING in Modem Mode. The default is Y (Yes), to show the IP address. Auto Increment Source Port Auto increment source port (N) ? _ MatchPort User Guide 56