Lantronix XPort Pro XPort Pro - User Guide - Page 108
IP Settings, To con the network protocol settings for IP: - multicast
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
12: Maintenance and Diagnostics Settings Protocol Stack TCP Settings Max Retrans Syn/Ack Max Timeout 4. Click Submit. Description Enter the maximum number of retransmissions of a SYN that will be attempted before failing. It is lower than "Max Retrans" to thwart denial-of-service attacks. Enter the maximum time between retransmissions. IP Settings To configure the network protocol settings for IP: 1. Select Protocol Stack on the menu bar. 2. Select IP. Figure 12-6 IP Protocol 3. Modify the following settings: Table 12-7 IP Protocol Settings Protocol Stack IP Settings IP Time to Live Multicast Time to Live Description This value typically fills the Time To Live in the IP header. SNMP refers to this value as "ipDefaultTTL". Enter the number of hops to be transmitted before the packet is discarded. This value fills the Time To Live in any multicast IP header. Normally this value will be one so the packet will be blocked at the first router. It is the number of hops allowed before a Multicast packet is discarded. Enter the value to be greater than one to intentionally propagate multicast packets to additional routers. 4. Click Submit. XPort Pro User Guide 108