Lantronix XPort Pro XPort Pro - User Guide - Page 57
Host Configuration, To con a selected remote host:
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
7: Terminal and Host Settings 3. Enter or modify the following settings: Terminal on Network Configuration Settings Terminal Type Login Connect Menu Exit Connect Menu Echo Table 7-4 Terminal on Network Configuration Description Enter text to describe the type of terminal. The text will be sent to a host via IAC. Note: IAC means, "interpret as command." It is a way to send commands over the network such as send break or start echoing. Select the interface to display when the user logs in. Choices are: Enabled = shows the Login Connect Menu. Disabled = shows the CLI Select whether to display a choice for the user to exit the Login Connect Menu and reach the CLI. Choices are: Enabled = a choice allows the user to exit to the CLI. Disabled = there is no exit to the CLI. Applies only to Connect Mode Telnet connections, not to Accept Mode. Only disable Echo if your terminal echoes, in which case you will see double of each character typed. 4. Click Submit to save changes. Host Configuration This Host web page is where you may view and modify current settings for a selected remote host. To configure a selected remote host: 1. Select Host on the menu bar. The Host web page appears. 2. Select a specific host number at the top of the page. The Host Configuration page for the selected host appears. Figure 7-5 Host Configuration XPort Pro User Guide 57