Lantronix XPort Pro XPort Pro - User Guide - Page 50
Connecting Multiple Hosts, Host List Promotion, Host Mode, Sequential, Simultaneous
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
6: Line and Tunnel Settings supports configuration of up to sixteen hosts. Connecting Multiple Hosts If more than one host is configured, a Host Mode option appears. Host Mode controls how multiple hosts will be accessed. For XPort Pro, the Connect Mode supports up to sixteen Hosts. Hosts may be accessed sequentially or simultaneously: Sequential - Sequential host lists establish a prioritized list of tunnels. The host specified as Host 1 will be attempted first. If that fails, it will proceed to Host 2, 3, etc, in the order they are specified. When a connection drops, the cycle starts again with Host 1 and proceeds in order. Establishing the host order is accomplished with host list promotion (see Host List Promotion on page 50). Sequential is the default Host Mode. Simultaneous - A tunnel will connect to all hosts accepting a connection. Connections occur at the same time to all listed hosts. The device can support a maximum of 64 total aggregate connections. Figure 6-17 Host 1, Host 2, Host 3 Exchanged Note: The CP Output option is only supported in XPort Pro and XPort AR. Host List Promotion This feature allows Host IP promotion of individual hosts in the overall sequence. To promote a specific Host: 1. Click the icon in the desired Host field, for example Host 2 and Host 3. 2. The selected Host(s) exchanges its place with the Host above it. 3. Click Submit. The hosts change sequence. XPort Pro User Guide 50