Lantronix XPort Pro XPort Pro - User Guide - Page 70
FTP Settings, To con FTP:
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
9: Service Settings SNMP Settings (continued) System Description System Location Traps State Traps Primary Destination Traps Secondary Destination Description Enter the system description. Enter the system location. Select Enabled to enable the transmission of SNMP Traps. The Cold Start trap is sent on device boot up, and the Linkdown trap is sent when the device is rebooted from software control. Enter the primary SNMP trap host. Enter the secondary SNMP trap host. 3. Click Submit. FTP Settings The FTP web page shows the current File Transfer Protocol (FTP) configuration and various statistics about the FTP server. To configure FTP: 1. Select FTP on the menu bar. The FTP page opens to display the current configuration. Figure 9-6 FTP Configuration 2. Enter or modify the following settings: FTP Settings State Admin Username Table 9-7 FTP Settings Description Select Enabled to enable the FTP server. Enter the username to use when logging in via FTP. XPort Pro User Guide 70