Lantronix XPort Pro XPort Pro - User Guide - Page 69
SNMP Settings, To con SNMP:
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
9: Service Settings 5. Repeat above steps as desired, according to additional line(s) available on your product. SNMP Settings Simple Network Management Protocol (SNMP) is a network management tool that monitors network devices for conditions that need attention. The SNMP service responds to SNMP requests and generates SNMP Traps. This page is used to configure the SNMP agent. To configure SNMP: 1. Select SNMP on the menu bar. The SNMP page opens and shows the current SNMP configuration. Figure 9-4 SNMP Configuration 2. Enter or modify the following settings: SNMP Settings State Read Community Write Community System Contact System Name Table 9-5 SNMP Description Select Enabled to enable SNMP. Enter the SNMP read-only community string. Enter the SNMP read/write community string. Enter the name of the system contact. Enter the system name. XPort Pro User Guide 69