Lantronix XPort Pro XPort Pro - User Guide - Page 117
Traceroute, To use Traceroute:
View all Lantronix XPort Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
12: Maintenance and Diagnostics Settings Figure 12-21 Diagnostics: Ping 2. Enter or modify the following settings: Table 12-22 Diagnostics: Ping Diagnostics: Ping Settings Host Count Timeout Description Enter the IP address or host name for the device to ping. Enter the number of ping packets the device should attempt to send to the Host. The default is 3. Enter the time, in seconds, for the device to wait for a response from the host before timing out. The default is 5 seconds. 3. Click Submit. The results of the ping display in the page. Traceroute Here you can trace a packet from the XPort Pro to an Internet host, showing how many hops the packet requires to reach the host and how long each hop takes. If you visit a web site whose pages appear slowly, you can use traceroute to determine where the longest delays are occurring. To use Traceroute: 1. Select Diagnostics on the menu bar and then Traceroute at the top of the page. The Diagnostics: Traceroute page opens. XPort Pro User Guide 117