Lenovo B520 Lenovo IdeaCentre B520 Hardware Maintenance Manual - Page 48

Replacing the rear I/O module

Get Lenovo B520 PDF manuals and user guides View all Lenovo B520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Hardware Maintenance Manual 13. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. 14. Use a thermal grease syringe to place 5 drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). 15. Install the system fan and heatsink back. 16. Install the EMI cover, back deco, the computer cover and the computer stand back. Replacing the rear I/O module To replace the rear I/O module: 1. Remove the computer cover. Refer to "Removing the computer cover". 2. Remove the back deco. Refer to "Removing the back deco". 3. Remove the computer stand. Refer to "Removing the computer stand". 4. Remove the EMI cover. Refer to "Removing the EMI cover". 5. Remove the 4 screws that secure the rear I/O module and metal bracket to the chassis. 6. Disconnect the TV antenna cable from the TV tuner card. 7. Lift up the rear I/O module. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Hardware Maintenance Manual
46
13. To secure the microprocessor in the socket, close the microprocessor
retainer and lock it into position with the small handle.
14. Use a thermal grease syringe to place 5 drops of grease on the top of
the microprocessor. Each drop of grease should be 0.03ml (3 tick marks
on the grease syringe).
15. Install the system fan and heatsink back.
16. Install the EMI cover, back deco, the computer cover and the computer
stand back.
Replacing the rear I/O module
To replace the rear I/O module:
1.
Remove the computer cover. Refer to “Removing the computer cover”.
2.
Remove the back deco. Refer to “Removing the back deco”.
3.
Remove the computer stand. Refer to “Removing the computer stand”.
4.
Remove the EMI cover. Refer to “Removing the EMI cover”.
5.
Remove the 4 screws that secure the rear I/O module and metal
bracket to the chassis.
6.
Disconnect the TV antenna cable from the TV tuner card.
7.
Lift up the rear I/O module.