Lexmark 260dn User's Guide - Page 87
TCP/IP menu, View Network Address, Job Timeout, Banner TCP/IP
UPC - 734646056960
View all Lexmark 260dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Menu item View Network Address UAA LAA Job Timeout 0-225 seconds Banner Page On Off Description Both addresses are represented by 12-digit hexadecimal numbers. Sets the amount of time in seconds that a network print job can take before it is canceled. Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value of 1-9 is selected, the setting is saved as 10. Allows the printer to print a banner page. Note: Off is the factory default setting. TCP/IP menu Use the following menu items to view or set the TCP/IP information. Note: This menu is available only for network models or printers attached to print servers. Menu item TCP/IP Activate On Off TCP/IP View Hostname TCP/IP IP Address TCP/IP Netmask TCP/IP Gateway TCP/IP Enable DHCP Yes No TCP/IP AutoIP Yes No Description Specifies whether to activate TCP/IP Note: On is the factory default setting. Shows the current TCP/IP hostname Lets you view or change the current TCP/IP Address information Note: This is a four-field IP Address. Lets you view or change the current TCP/IP Netmask information Note: This is a four-field IP Netmask. Lets you view or change the current TCP/IP Gateway information Note: This is a four-field IP Gateway. Lets you view or change the setting Note: Yes is the factory default setting. Lets you view or change the setting Note: Yes is the factory default setting. Understanding printer menus 87