Lexmark 854e Menus and Messages Guide - Page 102

Attendance messages Message Meaning Action 37 Insufficient memory The MFP cannot collate the job to collate job because the memory is full. Touch Continue to print the pages processed before the memory became full. Some memory frees up, so collating begins for the remainder of the print job. For example, if a 50-page print job is sent, and 10 copies are requested, and the MFP runs out of memory at page 30, pages 1-30 would collate and print 10 copies. The MFP would then print and collate pages 31-50 and print 10 copies of these pages. 37 Insufficient memory, The MFP depletes its memory while it Some held jobs are not restored. They stay on some held jobs were lost attempts to restore held jobs. The the hard disk and are inaccessible. message appears once. 37 Insufficient memory, Held jobs are deleted in order to some Held Jobs were lost process the current job. The message appears once per job. Touch Continue to clear the message and continue printing. To avoid this error in the future for other jobs, install more memory. Touch Cancel Job to cancel the current job if needed. 38 Memory full The MFP is processing data, but the memory used to store pages is full. To avoid this error in the future: Simplify the print job by reducing the amount of text or graphics on a page and deleting unnecessary downloaded fonts or macros. Install additional memory. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. 39 Page is too complex to print The page may not print correctly because the print information on the page is too complex. To avoid this error in the future: Reduce the complexity of the page by reducing the amount of text or graphics on the page and deleting unnecessary downloaded fonts or macros. Set Page Protect to On in the Setup Menu in the Settings menu. Install additional memory. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. 50 PPDS font error The MFP has received a request for a font that is not installed when formatting PPDS print data. Touch Continue to clear the message and continue printing the current job. Touch Cancel Job to cancel the current job if needed. Touch Reset Active Bin to change to another linked bin. 51 Defective flash detected The MFP detects a defective flash memory during power-on or during flash format and write operations. Touch Continue to clear the message and continue printing the current job. At power-on reset, touch Continue to clear the message and the MFP continues with normal operations except for flash operations. Install different flash memory to be able to download any resources to flash. 102