Lexmark C752 User Reference - Page 51
Reset Active Bin, Reset Printer, Network Menu, Job Buffering, MAC Binary PS, Network Buffer - windows 7 driver
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Menu Item Purpose Values Reset Active To define the active bin as the start bin (the first bin to receive printed output) in a set of linked Bin bins. Reset Printer To reset the printer to the user default value for each menu item, delete all downloaded resources (fonts, macros, and symbol sets) stored in printer memory (RAM), and delete all data in the interface link buffer. Before selecting Reset Printer, exit the software application you are using. Network Menu Use the Network Menu to change printer settings affecting jobs sent to the printer through a network port (either Standard Network or Network Opt ). Note: Values marked by an asterisk (*) are the factory default settings. Menu Item Job Buffering MAC Binary PS Network Buffer Network Setup Purpose Values To temporarily store jobs on the printer hard disk before printing. Note: Changing this menu item automatically resets the printer. Off* On Auto Does not buffer jobs to the hard disk. Buffers print jobs to the hard disk. Buffers print jobs only if the printer is busy processing data from another input port. To configure the printer to process On Macintosh binary PostScript print jobs. Printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. Note: This setting often causes Windows print jobs to fail. Off Printer filters PostScript print jobs using standard protocol. Auto* Printer processes print jobs from computers using either Windows or Macintosh operating systems. To configure the size of the network input buffer. Note: Changing the Network Buffer menu item automatically resets the printer. Auto* Printer automatically calculates the Network Buffer size (recommended setting). 3K to maximum size allowed User specifies the Network Buffer size. The maximum size depends on the amount of memory in your printer, the size of the other link buffers, and whether Resource Save is set to On or Off. To maximize the range for the Network Buffer size, disable or reduce the size of the parallel, serial, and USB buffers. To configure an internal print server. Values for this menu item are supplied by the specific print server. Select the menu item to see the available values. Note: Refer to the documentation on the drivers CD for more information. 51