Lexmark C752 User Reference - Page 79
Held Jobs May Not Be, Hole Punch Waste Full - itu
View all Lexmark C752 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Message What this message means What you can do Held Jobs May Not Be The printer memory cannot restore Restored Print and Hold jobs from the printer hard disk. Press Go to clear the message. Some of the Print and Hold jobs stored on the disk will not be restored. See also: 37 Insufficient Memory Hole Punch Waste Full The hole punch box in the finisher is Empty the hole punch box. full. Insert Staple Cartridge The staple cartridge in the finisher is missing or is installed incorrectly. • Correctly install the staple cartridge to clear the message. • Press Go to ignore the message and continue printing without stapling. Insert Tray The specified tray is either missing or not fully inserted. Insert the specified tray completely into the printer. See also: Loading the trays Install or Cancel Job The printer is requesting that a specified device be installed so it can print a job. • Turn the printer off, install the specified device, and restart the printer. • Press Menu to open the Job Menu and cancel the current job. Invalid Engine Code The printer engine code has not been Call for service. programmed or is not valid. See also: Calling for service Invalid Network Code Invalid Standard Network Code The code in an internal print server is not valid. The printer cannot receive and process jobs until valid code is programmed into the internal print server. Download valid code to the printer internal print server. Note: You can download network code while this message is displayed. ITU/Fuser Maint The counters that track wear on the image transfer unit and fuser have reached their limit. Replace the image transfer unit and fuser. See also: Replacing the fuser; Replacing the image transfer unit and transfer roller Load Manual A request for a manual feed job has been sent to the printer. The printer is ready for insertion of a single sheet into the manual feed slot. • Load a sheet of the paper specified in the second line of the display in the manual feed tray or multipurpose feeder. • Press Select or Go to ignore the manual feed request and print on paper already installed in one of the input sources. If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size, it prints on whatever paper is installed in the default input source. • Press Menu to open the Job Menu and cancel the current job. See also: Loading the multipurpose feeder Load Plain Letter Someone has initiated a tray calibration procedure. Load paper into and press Go to continue the calibration process. 79