Home » Lexmark Manuals » Laser Printers » Lexmark C752 » Manual Viewer

Lexmark C752 User Reference - Page 88

Input Config Error, Too Many Disks

Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Message What this message means What you can do 56 Serial Port Disabled 56 Standard Serial Disabled Data has been sent to the printer through a serial port, but the serial port is disabled. • Press Go to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled. See also: Serial Buffer 56 Parallel Port Disabled 56 Std Parallel Port Disabled Data has been sent to the printer through a parallel port, but the parallel port is disabled. • Press Go to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. See also: Parallel Buffer 56 USB Port Disabled 56 Standard USB Port Disabled Data has been sent to the printer through a USB port, but the USB port is disabled. • Press Go to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item in the USB Menu is not set to Disabled. See also: USB Buffer 58 Input Config Error Either too many drawers with matching trays are attached to the printer or the input configuration is invalid. (For example, a duplex unit is installed between Tray 3 and Tray 4.) Turn off and unplug the printer. Remove the additional drawers or reconfigure the offending option. Plug in the printer and turn it on. See also: Setup Guide 58 Output Config Error Too many output options have been attached to the printer. Turn off and unplug the printer. Remove the additional output option(s). Plug in the printer and turn it on. See also: Setup Guide 58 Too Many Disks Installed Too many hard disks are installed on the printer. The printer only supports one hard disk at a time. Turn off and unplug the printer. Remove the excess hard disks from the printer. Plug in the printer and turn it on. See also: Removing memory and option cards 58 Too Many Flash Options Too many flash memory options are installed on the printer. Turn off and unplug the printer. Remove the excess flash memory. Plug in the printer and turn it on. See also: Removing memory and option cards 59 Incompatible You have installed an incompatible device. Remove the device and press Go to clear the message. 61 Defective Disk The printer detects a defective hard disk. • Press Go to clear the message and continue printing. • Install a different hard disk before you perform any operations that require one. See also: Setup Guide 62 Disk Full There is not enough memory on the hard disk to store the data sent to the printer. • Press Go to clear the message and continue processing. Any information not previously stored on the hard disk is deleted. • Delete fonts, macros, and other data stored on the hard disk. 88

Section	Page
Table of contents	2
Notices	5
Edition notice	5
Edition:June2003	5
Trademarks	6
Licensing notice	7
Safety information	8
Cautions and warnings	8
Electronic emission notices	9
With a network cable or high-capacity output finisher installed	9
Japanese VCCI notice	10
The United Kingdom Telecommunications Act 1984	10
Without a network cable or high-capacity output finisher installed	10
Japanese VCCI notice	11
The United Kingdom Telecommunications Act 1984	11
Noise emission levels	11
Energy Star	12
Laser notice	12
Printer overview	13
Printing	15
Understanding the printer operator panel	16
Operator panel buttons	16
Sending a job to print	17
Canceling a print job	18
From the printer operator panel	18
From the Windows taskbar	18
From a Windows desktop	18
From a Macintosh computer	18
Loading the trays	19
Loading 500sheet trays	19
Loading the 2000sheet tray	22
Loading the multipurpose feeder	24
Printing on specialty media (transparencies, labels, other)	26
Linking trays	27
Linking bins	27
Holding a job in the printer	28
Printing and deleting held jobs	28
Accessing held jobs from the operator panel	28
Recognizing when format errors occur	29
Repeat Print	29
Reserve Print	29
Verify Print	29
Confidential jobs	30
Tips for successful printing	31
Storing paper	31
Storing supplies	31
Avoiding jams	32
Understanding fonts	33
Resident fonts	33
Symbol sets	38
Resident symbol sets	38
Printing sample fonts	40
Paper and specialty media specifications	41
Using printer menus	42
Color Menu	43
Color Adjust	43
Color Balance	43
Color Correction	43
Color Samples	44
Color Saver	44
Manual Color	45
Print Mode	45
Print Resolution	45
Toner Darkness	46
Finishing Menu	46
Blank Pages	46
Collation	46
Copies	46
Duplex	46
Duplex Bind	47
Hole Punch	47
Multipage Border	47
Multipage Order	47
Multipage Print	47
Multipage View	48
Offset Pages	48
Separator Sheets	48
Separator Source	48
Staple Job	48
Staple Prime Src	48
Help Menu	49
Print All	49
Help Guide	49
Printing Guide	49
Supplies Guide	49
Print Quality	49
Color Quality	49
Media Guide	49
Connection Guide	49
Moving Guide	49
Print Defects	49
Jam Clearance	49
Job Menu	49
Cancel Fax	49
Cancel Job	49
Confidential Job	50
Held Jobs	50
Print Buffer	50
Reset Active Bin	51
Reset Printer	51
Network Menu	51
Job Buffering	51
MAC Binary PS	51
Network Buffer	51
Network <x> Setup	51
NPA Mode	52
PCL SmartSwitch	52
PS SmartSwitch	52
Std Net Setup	52
Parallel Menu	53
Advanced Status	53
Honor Init	53
Job Buffering	53
MAC Binary PS	53
NPA Mode	53
Parallel Buffer	54
Parallel Mode1	54
Parallel Mode2	54
PCL SmartSwitch	54
PS SmartSwitch	54
Protocol	54
PCL Emul Menu	55
A4 Width	55
Auto CR after LF	55
Auto LF after CR	55
Font Name	55
Font Source	55
Lines per Page	55
Orientation	56
Pitch	56
Point Size	56
Symbol Set	56
Tray Renumber	56
Paper Menu	57
Assign Type/ Bin	57
Configure Bins	57
Configure MP	58
Custom Types	58
Output Bin	58
Overflow Bin	58
Paper Loading	59
Paper Size	60
Paper Source	60
Paper Texture	61
Paper Type	62
Paper Weight	63
Substitute Size	63
Universal Setup	63
PostScript Menu	64
Font Priority	64
Image Smoothing	64
Print PS Error	64
Serial Menu	65
Baud	65
Data Bits	65
Honor DSR	65
Job Buffering	65
NPA Mode	66
Parity	66
PCL SmartSwitch	66
PS SmartSwitch	66
Robust XON	66
Serial Buffer	67
Serial Protocol	67
Setup Menu	67
Alarm Control	67
Auto Continue	67
Black & White Lock	67
Display Language	68
Download Target	68
Hole Punch Alarm	68
Jam Recovery	68
Job Accounting	69
Page Protect	69
Power Saver	69
Print Area	70
Print Timeout	70
Printer Language	70
Printer Usage	70
Resource Save	70
Staple Alarm	71
Toner Alarm	71
Wait Timeout	71
Supplies Menu	72
<color> Toner	72
Oiler	72
Waste Bottle	72
USB Menu	72
Job Buffering	72
MAC Binary PS	72
NPA Mode	73
PCL SmartSwitch	73
PS SmartSwitch	73
USB Buffer	73
Utilities Menu	74
Color Alignment	74
Coverage Estimator	74
Defragment Flash	74
Factory Defaults	74
Format Disk	74
Format Flash	74
Hex Trace	74
Job Acct Stat	75
Print Directory	75
Print Fonts	75
Print Menus	75
Print Net <x> Setup	75
Understanding printer messages	76
Clear paper jams	91
Understanding jam messages	92
Paper jam messages	92
Access doors and trays	93
Clearing the entire paper path	94
Area A	94
Area B	94
Area C	95
Area D	95
Area T1	96
Area E	96
Area T<x>	96
Area J	97
Area K	97
Area L	97
Clearing mailbox or output expander jams (Area M)	98
Clearing fuser jams	99
Clearing image transfer unit jams	100
Clearing finisher jams (Areas 1–6)	106
If you still need help	106
Maintenance	107
Determining the status of supplies	108
Conserving supplies	108
Ordering supplies and maintenance items	109
Ordering a fuser	109
Ordering a web oiler	109
Ordering an image transfer unit and transfer roller	109
Ordering a print cartridge	109
Recycling used supplies	110
Refilled print cartridge notice	110
Mail return directions	110
Replacing print cartridges	111
Replacing the fuser	114
Replacing the toner waste container	116
Replacing the image transfer unit and transfer roller	118
Removing memory and option cards	128
Accessing the printer system board	128
Removing memory cards	129
Removing an option card	130
Removing a hard disk	131
Removing a firmware card	132
Reinstalling the system board access cover	133
Troubleshooting	134
Calling for service	135
Checking an unresponsive printer	135
Printing a menu settings page	135
Changing menu settings	136
Disabling Power Saver	137
Disabling the operator panel menus	137
Enabling the menus	138
Printing multi-language PDFs	138
Solving printing problems	139
Solving mailbox problems	140
Solving option problems	141
Solving paper feed problems	141
Solving print quality problems	142
Solving color quality problems	146
Frequently asked questions (FAQ) about color printing	146
Restoring factory default settings	150
Aligning the image transfer unit	151
Using the Coverage Estimator	152
Configuring printer alerts	153
Using the Setup Menu	153
Using MarkVision Professional	153
Using MarkVision Messenger	153
Size sensing	154
Disabling size sensing	154

Match case Limit results 1 per page

56 Serial Port <x>

Disabled

Data has been sent to the printer

through a serial port, but the serial port

is disabled.

•

Press

to clear the message. The

printer discards any data received

through the serial port.

•

Make sure the Serial Buffer menu item in

the Serial Menu is not set to Disabled.

See also:

Serial Buffer

56 Standard Serial

Disabled

56 Parallel Port <x>

Disabled

Data has been sent to the printer

through a parallel port, but the parallel

port is disabled.

•

Press

to clear the message. The

printer discards any data received

through the parallel port.

•

Make sure the Parallel Buffer menu item

in the Parallel Menu is not set to

Disabled.

See also:

Parallel Buffer

56 Std Parallel Port

Disabled

56 USB Port <x>

Disabled

Data has been sent to the printer

through a USB port, but the USB port

is disabled.

•

Press

to clear the message. The

printer discards any data received

through the USB port.

•

Make sure the USB Buffer menu item in

the USB Menu is not set to Disabled.

See also:

USB Buffer

56 Standard USB Port

Disabled

58 Input Config Error

Either too many drawers with matching

trays are attached to the printer or the

input configuration is invalid. (For

example, a duplex unit is installed

between Tray 3 and Tray 4.)

Turn off and unplug the printer. Remove the

additional drawers or reconfigure the

offending option. Plug in the printer and

turn it on.

See also:

Setup Guide

58 Output Config

Error

Too many output options have been

attached to the printer.

Turn off and unplug the printer. Remove the

additional output option(s). Plug in the

printer and turn it on.

See also:

Setup Guide

58 Too Many Disks

Installed

Too many hard disks are installed on

the printer. The printer only supports

one hard disk at a time.

Turn off and unplug the printer. Remove the

excess hard disks from the printer. Plug in

the printer and turn it on.

See also:

Removing memory and option

cards

58 Too Many Flash

Options

Too many flash memory options are

installed on the printer.

Turn off and unplug the printer. Remove the

excess flash memory. Plug in the printer

and turn it on.

See also:

Removing memory and option

cards

59 Incompatible

device

You have installed an incompatible

device.

Remove the device and press

to clear

the message.

61 Defective Disk

The printer detects a defective hard

disk.

•

Press

to clear the message and

continue printing.

•

Install a different hard disk before you

perform any operations that require one.

See also:

Setup Guide

62 Disk Full

There is not enough memory on the

hard disk to store the data sent to the

printer.

•

Press

to clear the message and

continue processing. Any information not

previously stored on the hard disk is

deleted.

•

Delete fonts, macros, and other data

stored on the hard disk.

Message

What this message means

What you can do