Lexmark C912 Setup Guide - Page 31
Installing the photodevelopers, Warning - transfer belt
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing the photodevelopers Warning: Do not touch, drop, or place anything on the transfer belt. Touching the surface of the transfer belt or placing items on it may damage it. Transfer belt Your printer ships with four color-coded photodevelopers which you must place inside the top cover. Each photodeveloper has its own color-coded position. 1 Lift and remove the four shipping spacers from the transfer belt. 2 Remove any shipping tape and packing material. Warning: The photodeveloper has a cover over the green glass tube. Do not touch the glass. Touching the glass may damage it and reduce print quality. Do not remove the cover until you begin installing the photodeveloper. 3 Remove one of the photodevelopers from its packing material. You can install the photodevelopers in any order. However, it may be easier to install them from left to right: black, yellow, cyan, and magenta. 4 Remove the tape from the photodeveloper. Install printer supplies 22