Lexmark C912 Setup Guide - Page 74
UTILITIES MENU, Print Net Setup, Ready - network driver
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
UTILITIES MENU 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 3 Press Menu until you see Print Net Setup, and then press Select. The network setup page prints and the printer returns to Ready status. 4 Check the first section on the network setup page and confirm that Status is "Connected." If Status is "Not Connected," your LAN drop may not be active or your network cable may be malfunctioning. Consult your network administrator for a solution, and then print another network setup page to verify that you are connected to your network. Save the network setup page. You will use it in the other steps. What do I do next? Task Configure for TCP/IP Install drivers for network printing Go to page... 66 68 Verify printer setup 65
UTILITIES MENU
1
Menu
2
Select
3
Return
4
Go
5
Stop
6
3
Press
Menu
until you see
Print Net Setup
, and then press
Select
. The network setup page prints and the printer returns to
Ready
status.
4
Check the first section on the network setup page and confirm
that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active
or your network cable may be malfunctioning. Consult your
network administrator for a solution, and then print another
network setup page to verify that you are connected to your
network.
Save the network setup page. You will use it in the other steps.
What do I do next?
Task
Go to page…
Configure for TCP/IP
66
Install drivers for network printing
68
Verify printer setup
65