Lexmark C912 Setup Guide - Page 32
fully seated., photodeveloper in until the unit is - color printer
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5 Align the photodeveloper with the slot in the printer. A label above each slot indicates which color photodeveloper should be installed. 6 While holding the photodeveloper with your left hand and the photodeveloper cover with your right hand, slide the photodeveloper in until the unit is fully seated. As the photodeveloper slides in, remove its cover. 7 Repeat steps 3 through 6 to install the remaining photodevelopers. Install printer supplies 23
5
Align the photodeveloper with the
slot in the printer. A label above
each slot indicates which color
photodeveloper should be
installed.
6
While holding the photodeveloper
with your left hand and the
photodeveloper cover with your
right hand, slide the
photodeveloper in until the unit is
fully seated.
As the photodeveloper slides in,
remove its cover.
7
Repeat steps 3 through 6 to install
the remaining photodevelopers.
Install printer supplies
23