Lexmark C912 Setup Guide - Page 54
Loading the multipurposefeeder, Tray 1 Type, Custom Type 1, Tray 1, Custom, Type 1, Types, Ready - manual
View all Lexmark C912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Tray 1 Type Custom Type 1 1 Menu 2 Select 3 Return 4 Go 5 Stop 6 8 Press Menu until you see Tray 1 Type, and then press Select. 9 Press Menu until you see Custom Type 1, and then press Select. 10 Press Return once. 11 Press Menu until you see Custom Types, and then press Select. 12 Press Menu until you see Custom Type 1, and then press Select. 13 Press Menu until you see the type of media you loaded in the heavy media tray, and then press Select. 14 Press Go. Ready is displayed. Loading the multipurpose feeder Note: The multipurpose feeder can only feed one sheet of glossy paper or banner paper at a time. Loading more than one sheet may cause paper jams. See page 38 for capacity limits for other types of print media. The multipurpose feeder provides an additional input of 100 sheets of paper. You can use the multipurpose feeder one of two ways: • Paper tray-Load plain paper, glossy paper, labels, card stock, or other print media in the feeder with the intention of leaving the media in the feeder. • Manual bypass feeder-Send a print job to the feeder while specifying the type and size of media from your computer. The printer then prompts you to load the appropriate print media before it prints. Load paper 45