LiftMaster EL25 EL25-KEYPAD PROGRAMMING Manual - Page 68

Direct Commands From The Phone, Speaking Through the Unit (Intercom Mode): 120

Page 68 highlights

Direct Commands From The Phone Direct Commands From The Phone Direct Commands From The Phone NPB / Single Family Residence ONLY With the Direct Command feature, you can perform various functions (e.g., unlock a door) from your phone. This feature is Only Available for a single-family residence or manger's phone sharing a phone line with the unit. The "No Phone Bill" (NPB) feature Does Not dial a separate number to reach you in your residence. The unit essentially functions as an intercom with your residence touch-tone phone. Therefore, the NPB does not generate monthly or per call telephone charges. Enable or Disable Direct Commands: 21 When enabled, you can control the system's relays from your touch-tone phone. Factory Setting: Enabled. 1 Press Then 2 Enable (1) or Disable (0). Then (#) Example: 1 2 Disables the direct commands. Speaking Through the Unit (Intercom Mode): 120 Initiate communications from a telephone through the unit at any time to greet visitors, ward off vandals, etc. 1 Press next step. (from the residence phone). If you are in the programming mode, go to 2 Press Then You may use the activate door 1 relay(s) or hang-up key after entering step 120. See visitor call response keys on page 60. Page 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Page 67
Direct Commands From The Phone
With the Direct Command feature, you can perform various functions (e.g., unlock a
door) from your phone. This feature is
Only Available
for a single-family residence
or manger’s phone sharing a phone line with the unit.
The "
N
o
P
hone
B
ill" (
NPB
) feature
Does Not
dial a separate number to reach you in
your residence. The unit essentially functions as an intercom with your residence
touch-tone phone. Therefore, the NPB does not generate monthly or per call
telephone charges.
Direct Commands From The Phone
Direct Commands From The Phone
NPB / Single Family Residence ONLY
Enable or Disable Direct Commands:
1
Press
Then
2
Enable (
1
) or Disable (
0
). Then (#)
When enabled, you can control the system’s relays from your touch-tone phone.
Factory Setting: Enabled.
Disables the direct commands.
Example:
1
2
Speaking Through the Unit (Intercom Mode):
1
Press
(from the residence phone). If you are in the programming mode, go to
next step.
2
Press
Then
Initiate communications from a telephone through the unit at any time to greet
visitors, ward off vandals, etc.
You may use the activate door 1 relay(s) or hang-up key after entering step
120
.
See visitor call response keys on page 60.
21
120