LiftMaster LA100 LA100 Linear Gate Operator Manual - Page 18

WIRING BEFORE installing power wiring or control stations be sure to follow ALL specifications and warnings described below. • Disconnect the power supply BEFORE proceeding. Operator MUST be properly grounded and connected in accordance with local electrical codes. • ALL electrical connections MUST be made by a qualified individual. • DO NOT install ANY wiring or attempt to run the operator without consulting the wiring diagram. • ALL power wiring should be on a dedicated circuit and well protected. The location of the power disconnect should be visible and clearly labeled. • cAoLnLdpuoi tw. er and KtDpTPiMmlheEoaidEyseneoPoieswntntvCirtttliLiehhrIaanEteonnncAusggjchtRauemiplt!GdeirursGriysoaeaaftrrnotetueorwaoesmv.rapeereaChnsDryeiiacnaptmelgeean.oasrtahvottCeeehnaglaeytanutaternsayonerce control wiring MUST be run in separate Connect Gate Operator to Control Box 1 WATERTIGHT CONNECTOR NUT Remove watertight connector nut from the control box. Insert operator cable through watertight connector nut. Watertight Connector Seal Nut TKtDPpiMhmleEoaidEyseneoPoieswntntvCirtttliLiehrhIaantEeonnncAusggjchtRauemiplt!GdeirursGriysoaeaaftrrnotetueorwaoesmv.rapeereaChnsDryeiiacnaptmelgeean.aosrtahvottCeeehnaglaeytanutaternsayonerce Operator Cable Operator 2 INSERT OPERATOR CABLE Insert operator cable through watertight connector mounted in the bottom of the control box. Control Box DpTPtKiMlhmeEoaidEyseneoPoieswntntvCirtttliLiehrhaIantEeonnncAusggjchtRauemiplt!GdeirursGriysaoeaaftrrnotetueorwaoesmv.rapeereaChsnDryeiiacnaptmelgeean.aosrtahvottCeeehnaglaeytanutaternsayonerce Operator Cable 24VAC Control Box Watertight Connector Operator Cable Watertight Connector Nut Wiring 18 Operator DKtpTPiMlmheEoaidEyseneoPoieswntntvCirtttliLiehhrIaantEeonnncAusggjchtRauemiplt!GdeirursGriysoaeaaftrrnotetueorwaoesmv.rapeereaChnsDryeiiacnaptmelgeean.oasrtahvottCeeehnaglaeytanutaternsayonerce