LiftMaster LA100 LA100 Linear Gate Operator Manual - Page 27
Manual Release, Maintenance, CHECK AT LEAST ONCE EVERY
View all LiftMaster LA100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Manual Release In case of a power failure, the operator can be disengaged from the gate. Follow the directions below to disconnect and reconnect the operator to the gate. RELEASE 1. Remove the hairpin clip. Turn release handle 180 degrees. 2. Swing operator up and away from gate and out of the way of gate travel. If a mechanical gate lock is used, disengage or remove the lock. ENGAGE 1. Align the traveler on the operator with the hole in the gate bracket. Turn release handle back to locked position. 2. Insert pin and secure with hairpin clip. Released position shown Release Handle Hairpin Clip Maintenance Description Entrapment Protection Systems Manual Disconnect Gate Mounting Hardware Total Unit CHECK AT LEAST ONCE EVERY Task Check for proper operation Check and operate Inspect for wear or damage Check for tightness Inspect for wear or damage 1 Month NOTES: 1. Disconnect power before servicing. 2. Severe or high cycle usage will require more frequent maintenance checks. 3. Inspection and service should always be performed anytime a malfunction is observed or suspected. 27 Operation and Maintenance