Linksys EPSX3 User Guide - Page 17

Instant EtherFast® Series Chapter 8: Advanced Properties The Advanced Properties section of the Web-based Utility is for users who have a thorough understanding of networks and network settings. Changing these settings can cause interruption of network communication and make the PrintServer cease functioning properly. To access the Advanced Properties, click the Advanced tab in the Web-based Utility. The AppleTalk Page AppleTalk is a network communications protocol which allows computers to talk to each other using Ethernet. Typically only Macintoshes use AppleTalk, although other platforms can be made to use it with extra software. AppleTalk Zones (if available) can be seen in the Chooser, the AppleTalk Control Panel, and the Network Browser. Once you have determined the AppleTalk Zone that you want the PrintServer to be associated with, enter its name in the field next to AppleTalk zone. The Printer Object type can be obtained from the printer's manufacturer. For each printer connected to the PrintServer, you will choose the Communications Protocol that allows the devices on the network to communicate. Choose either ASCII or Binary for each printer, according to the recommendation of the printer's manufacturer. If you make any mistakes prior to saving, click the Cancel button to exit the screen without making any changes. Once you are certain of any changes you have made, click the Save button to implement the changes. Note: Linksys does not support its products in an Apple networking environment. If you encounter trouble, consult your printer documentation for possible help with settings. EtherFast 10/100 PrintServers Figure 8-1 26 27