Linksys EPSX3 User Guide - Page 32
Appendix B: DHCP Support for, the PrintServer, Appendix C: Setting Up The, TCP/IP and IPX Protocols - print server manual
UPC - 745883548255
View all Linksys EPSX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Instant EtherFast® Series Appendix B: DHCP Support for the PrintServer To use DHCP, which assigns non-static IP addresses, you must have a DHCP server. Otherwise, the PrintServer's IP address will remain unknown and connecting to it will impossible. In this case, ignore DHCP and configure the PrintServer for a static IP address. DHCP is enabled by default. If you want to change settings, you must run the Bi-Admin program. When Bi-Admin loads, it scans the network for PrintServers and displays a list of PrintServers. Highlight the PrintServer to be set up, enter the PrintServer's password if one has been assigned, and click the OK button. After entering the program and selecting the PrintServer to be configured, click on Configuration in the menu and choose TCP/IP from the drop-down field. The TCP/IP Configuration window will appear. Select Enable to enable DHCP and click Save to Device. Then, exit the Bi-Admin program. To install the PrintServer driver, see the section on Windows Driver Setup. Note: For help with the Internet Mail Printing Configuration features, see the guide in the D:\Not_supp\Manual directory on the PrintServer Setup CD. Linksys does not provide technical support for this option. 56 EtherFast 10/100 PrintServers Appendix C: Setting Up The T C P/IP and IPX Protocols Setting Up TCP/IP in Windows Before a computer can communicate with the PrintServer, it must be configured with the TCP/IP protocol. If you know how to set up TCP/IP on your computers, do so now. Otherwise, use the guidelines below to help get TCP/IP installed on all of the computers that need PrintServer access. If you are unable to successfully install TCP/IP on one or more computers after following the directions, contact the manufacturer of your computers' network operating system for further assistance. Check with your network administrator for your TCP/IP settings. The directions below provide general guidelines for coming up with IP addresses and subnet masks. Check with your network administrator to see if you need to use specific IP addresses or DHCP settings. First, each computer on the network will require an IP address, which is a series of numbers, separated by periods, identifying the PC on the network. To make things simple, it is recommended you use the following numbering scheme: 10.0.1.X In this example, X is a unique, arbitrarily assigned number from 1 to 254. Each computer must have its own unique X number. Note: Never use 0 or 255 for X. These numbers are reserved by TCP/IP for other uses. For example, if you have three computers, you could number them as follows: 10.0.1.17 10.0.1.44 10.0.1.126 In this case, 17, 44, and 126 are arbitrary numbers between 1 and 254. Each computer will also require a subnet mask, which is a numerical "filter" that tells a computer what kinds of TCP/IP data packets to accept. If you're not sure which mask to use, the following mask is recommended: 255.255.255.0 57