Linksys EPSX3 User Guide - Page 33

Instant EtherFast® Series TCP/IP Setup for Windows 95, 98, and Millennium The following instructions are provided as examples for reference only. For complete instructions on installing and troubleshooting TCP/IP and IPX, consult your Windows operating system documentation. 1. Click the Start button, select Settings, and open the Control Panel. Inside the Control Panel, double-click the Network icon. 2. If the TCP/IP Protocol is listed for your network adapter, go to step four. Otherwise, click the Add button. 3. When the Component Type window appears, select Protocol and click the Add button. 4. Select Microsoft in the Manufacturers list and choose TCP/IP in the Network Protocols list. Then, click the OK button. 5. When the Network window reappears, click TCP/IP and then click the Properties button. 6. Select Specify an IP Address. 7. Enter an IP Address for the computer, along with a Subnet Mask. Click the OK button. If you do not have these values, consult your network administrator. 8. When the Network window reappears, click the OK button. Restart your machine. TCP/IP has now been successfully installed. IPX Setup for Windows 95, 98, and Millennium 1. Click the Start button, select Settings, and open the Control Panel. Inside the Control Panel, double-click the Network icon. 2. If the TCP/IP Protocol is listed for your network adapter, go to step four. Otherwise, click the Add button. 3. When the Component Type window appears, select Protocol and click the Add button. 4. Select Microsoft in the Manufacturers list and choose IPX/SPX protocol in the Network Protocols list. Then, click the OK button. 58 EtherFast 10/100 PrintServers 5. When the Network window reappears, click the OK button. Restart your machine. TCP/IP has now been successfully installed. TCP/IP Setup for Windows NT 4.0 1. Click the Start button, select Settings, and open the Control Panel. Inside the Control Panel, double-click the Network icon. 2. When the Network window appears, click the Protocols tab. Then, click the Add button. 3. Find the TCP/IP protocol in the Select Network Protocol field. Click on it once and then click the OK button. 4. When asked if you want to use DHCP, choose No. 5. If asked to supply your Windows NT CD, do so. NT will copy the necessary files to your system. You may have to switch between your PrintServer Setup CD and the NT CD. 6. When TCP/IP appears in the Network Protocols window, click the Bindings tab. Windows will store your new bindings. 7. Click the Protocols tab. Then, select TCP/IP. 8. Click the Properties button. Select the type of network adapter you have from the Adapters box and select Specify an IP Address. 9. Enter the computer's IP Address and Subnet Mask. Check with your network administrator for your settings. 10. Enter your Default Gateway if you have one. Note: A Default Gateway is not required. Check with your network administrator. 11. When you finish, click the OK button. If NT asks about WINS, ignore it. 12. When the Network window reappears, click the Close button. Restart your computer when prompted. TCP/IP has now been successfully installed. IPX Setup for Windows NT 4.0 1. Click the Start button, select Settings, and open the Control Panel. Inside the Control Panel, double-click the Network icon. 59