Linksys WRT54GX2 User Guide

Linksys WRT54GX2 - Wireless-G Broadband Router Manual

Get Linksys WRT54GX2 - Wireless-G Broadband Router PDF manuals and user guides
UPC - 745883566570
View all Linksys WRT54GX2 manuals
Add to My Manuals
Save this manual to your list of manuals

Linksys WRT54GX2 manual content summary:

  • Linksys WRT54GX2 | User Guide - Page 1
    2.4GHz 802.11g WIRELESS Wireless-G Broadband Router with SRX200 Model No. WRT54GX2 User Guide
  • Linksys WRT54GX2 | User Guide - Page 2
    than ever. Look for the following items when reading this User Guide: This checkmark means there is a note of interest and is something you should pay special attention to while using the Wireless-G Broadband Router. This exclamation point means there is a caution or warning and is something that
  • Linksys WRT54GX2 | User Guide - Page 3
    -G Broadband Router with SRX200 8 Overview 8 Hardware Installation for Connection to Your Broadband Modem 8 Placement Options 9 Chapter 5: Configuring the Wireless-G Broadband Router 10 Overview 10 The Setup Tab - Basic Setup 11 The Setup Tab - DDNS 16 The Setup Tab - MAC Address
  • Linksys WRT54GX2 | User Guide - Page 4
    Wireless-G Broadband Router with SRX200 The Administration Tab - Diagnostics 36 The Administration Tab - Factory Defaults 37 The Administration Tab - Firmware Upgrade 37 The Administration Tab - Config Management 38 The Status Tab - Router 39 The Status Tab - Local Network 40 The Status
  • Linksys WRT54GX2 | User Guide - Page 5
    Connect the Modem 8 Figure 4-3: Connect the Power 8 Figure 4-4: Router's Stand 9 Figure 4-5: Wall-Mount Measurements 9 Figure 5-1: Password Screen 10 Figure 5-2: Setup Tab - Basic Setup 11 Figure 5-3: DHCP Connection Type 11 Figure 5-4: Static IP Connection Type 12 Figure 5-5: PPPoE
  • Linksys WRT54GX2 | User Guide - Page 6
    - Factory Defaults 37 Figure 5-39: Administration Tab - Firmware Upgrade 37 Figure 5-40: Administration Tab - Config Management 38 Figure 5-41: Status Tab - Router 39 Figure 5-42: Status Tab - Local Network 40 Figure 5-43: DHCP Active IP Table 40 Figure 5-44: Status Tab - Wireless 41
  • Linksys WRT54GX2 | User Guide - Page 7
    you for choosing the Linksys Wireless-G Broadband Router with SRX200. The Router will allow you to network wirelessly better than ever, sharing Internet access, files and fun, easily and securely. How does the Router do all of this? A router is a device that allows access to an Internet connection
  • Linksys WRT54GX2 | User Guide - Page 8
    the Setup CD-ROM, then use the instructions in this Guide to help you connect the Router, set it up, and configure it to bridge your different networks. These instructions should be all you need to get the most out of the Wireless-G Broadband Router with SRX200. What's in this Guide? This user guide
  • Linksys WRT54GX2 | User Guide - Page 9
    Wireless-G Broadband Router with SRX200 • Appendix B: Wireless Security This appendix explains the risks of wireless networking and some solutions to reduce the risks. • Appendix C: Upgrading Firmware This appendix instructs you on how to upgrade the Router's firmware should you need to do so. •
  • Linksys WRT54GX2 | User Guide - Page 10
    router or an access point, which serves as the main point of communications in a wireless network. The Router transmits data to PCs equipped with wireless network adapters, which can roam within a certain radial range of the Router. You can arrange the Router and multiple access points to work
  • Linksys WRT54GX2 | User Guide - Page 11
    's switches. With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys website at www.linksys.com for more information about products that work with the Wireless-G Broadband Router with SRX200. Chapter 2: Planning Your Wireless Network 5 Network Layout
  • Linksys WRT54GX2 | User Guide - Page 12
    : Resetting the Router will erase all of your settings (wireless security, network settings, etc.) and replace them with the factory defaults. Do not reset the Router if you want to retain these settings. Chapter 3: Getting to Know the Wireless-G Broadband Router with SRX200 6 The Router's Ports
  • Linksys WRT54GX2 | User Guide - Page 13
    Wireless-G Broadband Router with SRX200 The Router's LEDs The Router's LEDs, which displays information about network activity, are located on another side panel. ETHERNET 1, 2, 3, 4 INTERNET WIRELESS DMZ POWER Figure 3-2: The Router's LEDs Green. These numbered LEDs, corresponding with the
  • Linksys WRT54GX2 | User Guide - Page 14
    Wireless-G Broadband Router with SRX200 Chapter 4: Connecting the Wireless-G Broadband Router with SRX200 Overview Linksys recommends using the Setup Wizard on the Setup CD-ROM for first-time installation of the Router. For advanced users, you may follow the instructions in this chapter, and then
  • Linksys WRT54GX2 | User Guide - Page 15
    down until the screws fit snugly into the wall- mount slots. Proceed to "Chapter 5: Configuring the Wireless-G Broadband Router." Chapter 4: Connecting the Wireless-G Broadband Router with SRX200 Placement Options Figure 4-4: Router's Stand 60 mm (2.36 inches) Figure 4-5: Wall-Mount Measurements 9
  • Linksys WRT54GX2 | User Guide - Page 16
    one of the main tabs. To access the Web-based Utility, launch Internet Explorer or Netscape Navigator, and enter the Router's default IP address, 192.168.1.1, in the Address field. Then, press Enter. A password request page will appear. (Non-Windows XP users will see a similar screen.) Leave the
  • Linksys WRT54GX2 | User Guide - Page 17
    default, the Router's Internet Connection Type is set to Automatic Configuration - DHCP, which should be kept only if your ISP supports DHCP or you are connecting through a dynamic IP address. Figure 5-2: Setup Tab - Basic Setup Figure 5-3: DHCP Connection Type Chapter 5: Configuring the Wireless
  • Linksys WRT54GX2 | User Guide - Page 18
    Wireless-G Broadband Router with SRX200 • Static IP. If you are required to use a permanent IP address to connect to the Internet, select Static IP. Internet IP Address. This is the Router's IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify
  • Linksys WRT54GX2 | User Guide - Page 19
    Wireless-G Broadband Router with SRX200 • PPTP. Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only. Specify Internet IP Address. This is the Router's IP address, as seen from the Internet. Your ISP will provide you with the IP Address you need to specify
  • Linksys WRT54GX2 | User Guide - Page 20
    Wireless tab. Router IP This presents both the Router's IP Address and Subnet Mask as seen by your local network. Figure 5-8: Optional Settings packet: a unit of data sent over a network Figure 5-9: Router IP Chapter 5: Configuring the Wireless-G Broadband Router 14 The Setup Tab - Basic Setup
  • Linksys WRT54GX2 | User Guide - Page 21
    Wireless-G Broadband Router with SRX200 Network Address Server Settings (DHCP) The settings allow you to configure the Router's Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to
  • Linksys WRT54GX2 | User Guide - Page 22
    do not want to use DDNS, keep the default, Disable. User Name. Enter the User Name for your DDNS account Password. Enter the Password for your DDNS account. Host Name. This is the DDNS URL assigned by the DDNS service. Internet IP Address. This displays the Router's current IP Address as seen on the
  • Linksys WRT54GX2 | User Guide - Page 23
    Wireless-G Broadband Router with SRX200 The Setup Tab - MAC Address Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC
  • Linksys WRT54GX2 | User Guide - Page 24
    want to assign a static route. Figure 5-14: Setup Tab - Advanced Routing default gateway: a device that forwards Internet traffic from your local area network Figure 5-15: Setup Tab - Advanced Routing - NAT Mode Chapter 5: Configuring the Wireless-G Broadband Router 18 The Setup Tab - Advanced
  • Linksys WRT54GX2 | User Guide - Page 25
    Wireless-G Broadband Router with SRX200 Subnet Mask. The Subnet Mask determines which portion of a Destination LAN IP address is the network portion, and which portion is the host portion. Default Gateway. This is the IP address of the gateway device that allows for contact between the Router and
  • Linksys WRT54GX2 | User Guide - Page 26
    wireless standards running on your network. If you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed. If you have only 802.11g devices, select G-Only. If you do not have any 802.11g and 802.11b devices in your network, select Disable. SRX200 works automatically
  • Linksys WRT54GX2 | User Guide - Page 27
    five wireless security mode options supported by the Router: WPA-Personal, WPA2 Personal, WPA Enterprise, WPA2 Enterprise, and WEP. (WPA stands for Wi-Fi Protected Access, WEP stands for Wired Equivalent Privacy, and WPA Enterprise uses a RADIUS (Remote Authentication Dial-In User Service) server
  • Linksys WRT54GX2 | User Guide - Page 28
    Wireless-G Broadband Router with SRX200 WEP. WEP is a basic encryption method, which is not as secure as WPA or WPA2. To use WEP, select a Default Transmit Key (choose which Key to use), and a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. Then either
  • Linksys WRT54GX2 | User Guide - Page 29
    Wireless-G Broadband Router with SRX200 The Wireless Tab - Wireless MAC Filter Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network. Wireless MAC Filter Wireless MAC Filter. This screen lets you filter wireless users by MAC Address. If
  • Linksys WRT54GX2 | User Guide - Page 30
    its Basic Rate Set to the other wireless devices in your network, so they know which rates will be supported. The Router will also advertise that it will automatically select the best rate for transmission. In most cases, you should keep the default setting, Basic Rate Set #2, which includes higher
  • Linksys WRT54GX2 | User Guide - Page 31
    Wireless-G Broadband Router with SRX200 RTS Threshold. Should you encounter inconsistent data flow, only minor reduction of the default value, 2347, is recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends Request
  • Linksys WRT54GX2 | User Guide - Page 32
    Wireless-G Broadband Router with SRX200 The Security Tab - Firewall Use this screen to configure the firewall and VPN pass through settings. Firewall Firewall Protection. Enable this feature to employ Stateful Packet Inspection (SPI) for more detailed review of data packets entering your network
  • Linksys WRT54GX2 | User Guide - Page 33
    of IP Addresses if you want this policy to affect a group of PCs. After making your changes, click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. Then click the Close button. Chapter 5: Configuring the Wireless-G Broadband Router The Access Restrictions
  • Linksys WRT54GX2 | User Guide - Page 34
    5-28: Port Services ftp: a protocol used to transfer files over a TCP/IP network telnet: a user command and TCP/IP protocol used for accessing remote PCs url: the address of a file located on the Internet Chapter 5: Configuring the Wireless-G Broadband Router 28 The Access Restrictions Tab
  • Linksys WRT54GX2 | User Guide - Page 35
    Wireless-G Broadband Router with SRX200 The Applications and Gaming Tab - Port Range Forward The Applications and Gaming Tab allows you to set up public services , either TCP or UDP, or Both. IP Address. For each application, enter the IP Address of the PC running the specific application. Enable
  • Linksys WRT54GX2 | User Guide - Page 36
    Broadband Router with SRX200 The Applications and Gaming Tab - Port Triggering Port Triggering is used for special applications that can request a port to be opened on demand. For this feature, the Gateway will watch outgoing data for specific port numbers. The Gateway will remember the IP address
  • Linksys WRT54GX2 | User Guide - Page 37
    Wireless-G Broadband Router with SRX200 The Applications and Gaming Tab - QoS Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as videoconferencing. QoS (Quality of Service) Wireless ACK Mode. This
  • Linksys WRT54GX2 | User Guide - Page 38
    Wireless-G Broadband Router with SRX200 Add a New Application Enter a Name Enter any name to indicate the name of the entry. Category Select from Port Range or MAC Address for the Router for FTP, you can enter 21-21. If you need services for an application that uses from 1000 to 1250, you enter
  • Linksys WRT54GX2 | User Guide - Page 39
    Wireless-G Broadband Router with SRX200 Remove This button allows you to remove the application entry. To remove the entry, click the to apply your changes or Cancel Changes to cancel your changes. Chapter 5: Configuring the Wireless-G Broadband Router 33 The Applications and Gaming Tab - QoS
  • Linksys WRT54GX2 | User Guide - Page 40
    Wireless-G Broadband Router with SRX200 The Administration Tab - Management This section of the Administration tab allows the network's administrator to manage specific Router functions for access and security. Router Password Local Router Access Router Password and Re-enter to confirm. You can
  • Linksys WRT54GX2 | User Guide - Page 41
    Wireless-G Broadband Router with SRX200 The Administration Tab - Log When you click the Administration tab, you will see the Log screen. The Log screen provides you with options for system, Firewall, WAN Connection, and New Traffic logs of all incoming and outgoing URLs or IP addresses for your
  • Linksys WRT54GX2 | User Guide - Page 42
    Wireless-G Broadband Router with SRX200 The Administration Tab - Diagnostics The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. Ping Test Ping Parameters Ping Target IP . To start the test, enter the IP address or domain name of the PC whose
  • Linksys WRT54GX2 | User Guide - Page 43
    5-38: Administration Tab - Factory Defaults Figure 5-39: Administration Tab - Firmware Upgrade Chapter 5: Configuring the Wireless-G Broadband Router The Administration Tab - Factory Defaults firmware: the programming code that runs a networking device download: to receive a file transmitted
  • Linksys WRT54GX2 | User Guide - Page 44
    Wireless-G Broadband Router with SRX200 The Administration Tab - Config Management The Config Management screen allows you to backup the Router's settings and restore them later. Backup Configuration Backup. Simply, click the Backup button and save the config file to your hard drive. Restore
  • Linksys WRT54GX2 | User Guide - Page 45
    set on the Setup Tab. Internet IP Address. Displayed here is the Internet IP Address of the Router. Subnet Mask. Displayed here is the Subnet Mask of the Router. Default Gateway. Displayed here is the IP address of the Default Gateway. DNS IP Address. Displayed here is IP address of the DNS server
  • Linksys WRT54GX2 | User Guide - Page 46
    Wireless-G Broadband Router with SRX200 The Status Tab - Local Network The Local Network screen on the Status Tab displays the status of your network. Local Network MAC Address. This is the Router's MAC Address, as seen on your local, Ethernet network. IP Address. This shows the Router's IP Address,
  • Linksys WRT54GX2 | User Guide - Page 47
    Wireless-G Broadband Router with SRX200 The Status Tab - Wireless The Wireless screen on the Status Tab displays the status of your wireless network. Wireless MAC Address. This is the Router's MAC Address, as seen on your local, wireless network. Mode. As selected from the Wireless tab, this will
  • Linksys WRT54GX2 | User Guide - Page 48
    Statistics for the network traffic on the Internet connection and wireless connectivity are shown in two separate columns. IP Address. The IP address of the Router's interface is displayed here. MAC Address. The MAC address of the Router's interface is shown here. Packets Received. The number of
  • Linksys WRT54GX2 | User Guide - Page 49
    Wireless-G Broadband Router with SRX200 Packets Sent. The number of packets sent is displayed here. the Refresh button to update the on-screen information. Help information is shown on the right-hand side of the screen. Chapter 5: Configuring the Wireless-G Broadband Router 43 The Status Tab
  • Linksys WRT54GX2 | User Guide - Page 50
    Wireless-G Broadband Router with SRX200 Appendix A: Troubleshooting This appendix consists of two parts: "Common Problems and Solutions" and "Frequently Asked Questions." Provided are possible solutions to problems that may occur during the installation and operation of the Router. Read the
  • Linksys WRT54GX2 | User Guide - Page 51
    the following IP address option. 4. Enter a unique IP address that is not used by any other computer on the network connected to the Router. 5. Enter the Subnet Mask, 255.255.255.0. 6. Enter the Default Gateway, 192.168.1.1 (Router's default IP address). 7. Toward the bottom of the window, select
  • Linksys WRT54GX2 | User Guide - Page 52
    . Contact your ISP to see if your Internet connection type is DHCP, Static IP Address, or PPPoE (commonly used by DSL consumers). Please refer to the Setup section of "Chapter 5: Configuring the Wireless-G Broadband Router" for details on Internet connection settings. • Make sure you have the right
  • Linksys WRT54GX2 | User Guide - Page 53
    Wireless-G Broadband Router with SRX200 6. I am not able to access the Setup page of the Router's web-based utility. • Refer to "Problem #3, I want to test my Internet connection" to verify that your computer is properly connected to the Router. • Refer to "Appendix E: Finding the MAC Address and IP
  • Linksys WRT54GX2 | User Guide - Page 54
    Internet application: 1. Access the Router's web interface by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications & Gaming => Port Forwarding tab. 2. Enter any name you want to use for the Customized Application. 3. Enter the External Port range of the service you are
  • Linksys WRT54GX2 | User Guide - Page 55
    . Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If you are still getting prompted for a password when saving settings, then perform the following steps: 1. Access the Router's web-based utility by going to http://192.168.1.1 or the IP address
  • Linksys WRT54GX2 | User Guide - Page 56
    a setup option to "keep alive" the connection. This may not always work, so you may need to reestablish connection periodically. 1. To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router. 2. Enter the password, if asked. (The default password is
  • Linksys WRT54GX2 | User Guide - Page 57
    do, ensure that your workstation's IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem. • If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and powered on. Connect to it and
  • Linksys WRT54GX2 | User Guide - Page 58
    the speed of your broadband connection. The Router also supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router. What is Network Address Translation and what is it used for? Network Address Translation (NAT) translates multiple IP addresses on the private LAN
  • Linksys WRT54GX2 | User Guide - Page 59
    Wireless-G Broadband Router with SRX200 such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many private addresses behind this single address provided by the ISP. Does the Router support any operating system other than Windows 98SE, Windows Millennium,
  • Linksys WRT54GX2 | User Guide - Page 60
    of new Router firmware upgrades? All Linksys firmware upgrades are posted on the Linksys website at www.linksys.com, where they can be downloaded for free. To upgrade the Router's firmware, use the System tab of the Router's web-based utility. If the Router's Internet connection is working well
  • Linksys WRT54GX2 | User Guide - Page 61
    Wireless-G Broadband Router with SRX200 If DMZ Hosting is used, does the exposed user share the public IP with the Router? No. Does the Router pass PPTP packets or actively route PPTP sessions? The Router allows PPTP packets to pass through. Is the Router cross-platform compatible? Any platform that
  • Linksys WRT54GX2 | User Guide - Page 62
    Wireless-G Broadband Router with SRX200 What IEEE 802.11g features are supported? The product supports the following IEEE 802.11g functions: • CSMA/CA plus Acknowledge protocol • OFDM protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature • Fragmentation • Power Management
  • Linksys WRT54GX2 | User Guide - Page 63
    Wireless-G Broadband Router with SRX200 selects the right access point and registers its address. Communications between end node and host computer can then be transmitted up and down the backbone. As the user moves on, the end node's RF transmitter regularly checks the system to determine whether
  • Linksys WRT54GX2 | User Guide - Page 64
    Wireless-G Broadband Router with SRX200 practical purposes, this number is usually permanent. Unlike IP addresses, which can change every time a computer logs onto the network, the MAC address of a device stays the same, making it a valuable identifier for the network. How do I reset the Router?
  • Linksys WRT54GX2 | User Guide - Page 65
    Wireless-G Broadband Router with SRX200 Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation
  • Linksys WRT54GX2 | User Guide - Page 66
    Wireless-G Broadband Router with SRX200 SSID. There are several things to keep in mind about the SSID: 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows
  • Linksys WRT54GX2 | User Guide - Page 67
    Wireless-G Broadband Router with SRX200 WPA/WPA2 Personal. Select the type of algorithm, TKIP or AES, enter a password in the Personal Key field of 8-64 characters, and enter a Group Key Renewal time period between 0 and 7,200 seconds, which instructs the Router or other device how often it should
  • Linksys WRT54GX2 | User Guide - Page 68
    Wireless-G Broadband Router with SRX200 Appendix C: Upgrading Firmware The Broadband Router's firmware is upgraded through the Web-based Utility's Administration tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com. 2. Extract the firmware file on your
  • Linksys WRT54GX2 | User Guide - Page 69
    Wireless-G Broadband Router with SRX200 Appendix D: Windows Help Almost all Linksys wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help
  • Linksys WRT54GX2 | User Guide - Page 70
    Wireless-G Broadband Router with SRX200 Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer's Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. You can
  • Linksys WRT54GX2 | User Guide - Page 71
    Wireless-G Broadband Router with SRX200 Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3. Write down the Physical Address as shown on your
  • Linksys WRT54GX2 | User Guide - Page 72
    Wireless-G Broadband Router with SRX200 Appendix F: Glossary This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point - A device that allows wireless-
  • Linksys WRT54GX2 | User Guide - Page 73
    Wireless-G Broadband Router with SRX200 DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be "seen" from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses. Domain - A
  • Linksys WRT54GX2 | User Guide - Page 74
    Wireless-G Broadband Router with SRX200 IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement secure
  • Linksys WRT54GX2 | User Guide - Page 75
    of information before allowing them to enter the network. SSID (Service Set IDentifier) - Your wireless network's name. Static IP Address - A fixed address assigned to a computer or device that is connected to a network. Static Routing - Forwarding data in a network via a fixed path. Subnet Mask
  • Linksys WRT54GX2 | User Guide - Page 76
    -G Broadband Router with SRX200 TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with
  • Linksys WRT54GX2 | User Guide - Page 77
    Wireless-G Broadband Router with SRX200 Appendix G: Specifications Model WRT54GX2 Standards IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE 802.11b Ports Power, Internet, Ethernet(1-4) Buttons Reset LEDs Power, Internet, Ethernet(1-4), Wireless, DMZ Cabling Type Ethernet # of Antennas 2
  • Linksys WRT54GX2 | User Guide - Page 78
    Wireless-G Broadband Router with SRX200 Appendix H: Warranty Information LIMITED WARRANTY Linksys warrants to You that, for a period of three years (the "Warranty Period"), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy
  • Linksys WRT54GX2 | User Guide - Page 79
    Wireless-G Broadband Router with SRX200 Appendix I: Regulatory Information FCC Statement This product has been tested radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee
  • Linksys WRT54GX2 | User Guide - Page 80
    Wireless-G Broadband Router with SRX200 User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers
  • Linksys WRT54GX2 | User Guide - Page 81
    Wireless-G Broadband Router with SRX200 Appendix I: Regulatory Information 75
  • Linksys WRT54GX2 | User Guide - Page 82
    Wireless-G Broadband Router with SRX200 Appendix I: Regulatory Information 76
  • Linksys WRT54GX2 | User Guide - Page 83
    Wireless-G Broadband Router with SRX200 Appendix I: Regulatory Information 77
  • Linksys WRT54GX2 | User Guide - Page 84
    Wireless-G Broadband Router with SRX200 For more information, visit www.linksys.com. Appendix I: Regulatory Information 78
  • Linksys WRT54GX2 | User Guide - Page 85
    Wireless-G Broadband Router with SRX200 Appendix J: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates in this Guide.) http://www.linksys.com or ftp.linksys.com 800-546-5797 (LINKSYS) 949-823-3002 800-326-7114 [email protected] 949-
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Model No.
Broadband Router
Wireless-
G
WRT54GX2
User Guide
WIRELESS
GHz
2.4
802.11g
with SRX200