Linksys WRT54GX2 User Guide - Page 23
The Setup Tab - MAC Address Clone, Enable/Disable, User Defined Entry, Clone Your PC's MAC
UPC - 745883566570
View all Linksys WRT54GX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Wireless-G Broadband Router with SRX200 The Setup Tab - MAC Address Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature. MAC Enable/Disable. To have the MAC Address cloned, click the radio button beside Enable. User Defined Entry. Enter the MAC Address registered with your ISP here. Clone Your PC's MAC. Clicking this button will clone the MAC address of your registered PC. Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. Figure 5-13: Setup Tab - MAC Address Clone mac address: the unique address that a manufacturer assigns to each networking device. Chapter 5: Configuring the Wireless-G Broadband Router 17 The Setup Tab - MAC Address Clone