Lowrance Elite-12 Ti Operator Manual EN - Page 52
Data Fields, Navigate to cursor position, Navigate a route
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
5 Bearing line with allowed off course limit When travelling on a route the bearing line shows the intended course from one waypoint towards the next. When navigating towards a waypoint (cursor position, MOB, or an entered latitude and longitude position), the bearing line shows the intended course from the point at which navigation was started towards the waypoint. 6 Vessel symbol Indicates distance and bearing relative to the intended course. If the XTE (Cross Track Error) exceeds the defined XTE limit, this is indicated with a red arrow including the distance from the track line. Data Fields The Steer panel provides the following information: XTE Cross track error SOG Speed over ground COG Course over ground POS Position DTD Distance to destination TTD Time to destination Navigate to cursor position Position the cursor at the selected destination on the panel, and then select the Goto Cursor option in the menu. Ú Note: The Goto Cursor menu option is not available if you are already navigating. Navigate a route When route navigation is started, the menu expands and shows options for canceling the navigation, for skipping a waypoint, and for restarting the route from current vessel position. 52 Navigating | ELITE Ti Operator Manual