Lowrance Elite-12 Ti Operator Manual EN - Page 85
Heading Lock mode, Standby mode, Turn pattern steering, Setting up a turn pattern, U-turn, Spiral turn
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Heading Lock mode Locks and maintains the current vessel heading. Use the left and right arrow buttons in the Autopilot Controller to make heading adjustments. To make small heading adjustments, single-select the left or right buttons. For larger adjustments, select and hold the left or right buttons. Standby mode Cancels autopilot activity and returns the vessel to handheld remote or foot pedal steering control. Turn pattern steering Steers the vessel in predefined turn patterns. When you select a turn pattern, the system creates temporary waypoints on the turn. The last waypoint on the turn is the final waypoint. When the vessel reaches the final waypoint, the vessel goes into arrival mode. Refer to "Arrival mode" on page 88. Setting up a turn pattern 1. Select a turn pattern. 2. Enter the desired value(s) in the turn pattern dialog or use default settings. 3. Select the direction of the turn. Ú Note: Selecting a turn radius smaller than the GPS accuracy may result in incomplete navigation of the turn pattern. U-turn Changes the current set heading to be 180° in the opposite direction. C-turn Steers the vessel in a C-shaped pattern. Spiral turn Steers the vessel in a spiral with a decreasing or increasing radius. Negative values indicate decreasing radius while positive values indicate increasing radius. Trolling motor autopilot | ELITE Ti Operator Manual 85