Lowrance Elite-12 Ti Operator Manual EN - Page 57
Zooming the image, Using the cursor on the image, Viewing history, Zoom bar, Clear cursor
View all Lowrance Elite-12 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Zooming the image You can zoom the image by: • using the zoom (+ or -) buttons • using the +/- keys Zoom level is shown on the bottom left side of the image. When zooming in, the sea floor is kept near the bottom of the screen, irrespective of whether it is in auto-range or manual range. If the range is set considerably less than the actual depth, the unit is not able to find the bottom when zooming. If the cursor is active, the unit zooms in where the cursor is pointed. Zoom bar The zoom bar is displayed when you zoom the image. Drag the zoom bar vertically to view different parts of the water column. Using the cursor on the image The cursor can be used to measure a distance to a target, to mark a position, and to select targets. By default, the cursor is not shown on the image. When you position the cursor on the image; the screen pauses, the depth at the cursor position is shown, and the information window and the history bar are activated. To remove the cursor and cursor elements from the panel, select the Clear cursor menu option. Viewing history Whenever the cursor is shown on the Sonar panel, the scroll bar is shown at the top of the panel. The scroll bar shows the image you are currently viewing in relation to the total Sonar image history stored. If the scroll bar is on the far right side, it indicates that you are viewing the latest soundings. If you position the cursor to the left side of the screen, the history bar starts scrolling towards the left, and the automatic scrolling as new soundings are received is turned off. Sonar | ELITE Ti Operator Manual 57