MSI K7N2 User Guide - Page 38
Fan Power Connectors: CFAN1/SFAN1
View all MSI K7N2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hardware Setup Fan Power Connectors: CFAN1/SFAN1 The CFAN1 (processor fan) and SFAN1 (system fan) support system cooling fan with +12V. It supports three-pin head connector. When connecting the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. GND +12V SENSOR CFAN1 GND +12V SENSOR SFAN1 MSI Reminds You... Always consult the vendors for proper CPU cooling fan. 2-17
2-17
Hardware Setup
Fan Power Connectors: CFAN1/SFAN1
The CFAN1 (processor fan) and SFAN1 (system fan) support system
cooling fan with +12V. It supports three-pin head connector. When connect-
ing the wire to the connectors, always take note that the red wire is the posi-
tive and should be connected to the +12V, the black wire is Ground and should
be connected to GND. If the mainboard has a System Hardware Monitor chipset
on-board, you must use a specially designed fan with speed sensor to take
advantage of the CPU fan control.
CFAN1
SENSOR
+12V
GND
SENSOR
+12V
GND
SFAN1
MSI Reminds You...
Always consult the vendors for proper CPU cooling fan.