MSI K9NU User Guide - Page 16
Socket 1207 CPU & Cooler Installation
View all MSI K9NU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
MS-9655 Server Board Socket 1207 CPU & Cooler Installation 1. Locate the first CPU socket. (The CPU has a plastic cap on it to protect the contact from damage. Before installing the CPU, always cover it to protect the socket pins.) 2. Remove the plastic cap from the load plate. The pins of the socket reveal. 3. Raise the load lever up to its full extent. 4. Open the load plate. 5. After confirming the CPU direction (indicated below with red circles) for correct mating, put down the CPU in the socket housing frame. Be sure to grasp on the edge of the CPU base. Note that the alignment keys are matched. 6. Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with pure vertical motion and reinstall. Yellow triangle is the Pin 1 indicator Alignment Key 2-4 Alignment Key Yellow Triangle