MSI K9NU User Guide - Page 80
Rebuilding a RAID Array
View all MSI K9NU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
MS-9655 Server Board Rebuilding a RAID Array Rebuilding is the process of restoring data to a hard drive from other drives in the array. This applies only to fault tolerant arrays such as RAID 1. For example, assuming you have a two disk RAID 1 array, and one of the drives fail, then you need the lost data on the newly added drive. Rebuilding Instructions After creating a mirrored array, you can rebuild the array using the following steps: 1 Go to Windows and run the NVIDIA RAID Management utility. The picture below shows an example of a system with one mirrored array and two free disks. 2. Right-click on Mirroring. The popup menu appears. 3. From the popup menu, click Rebuild Array. The NVIDIA Rebuild Array W izard appears. A-22
A-22
MS-9655 Server Board
Rebuilding a RAID Array
Rebuilding is the process of restoring data to a hard drive from other drives in the
array. This applies only to fault tolerant arrays such as RAID 1. For example, assum-
ing you have a two disk RAID 1 array, and one of the drives fail, then you need the
lost data on the newly added drive.
Rebuilding Instructions
After creating a mirrored array, you can rebuild the array using the following steps:
1
Go to Windows and run the NVIDIA RAID Management utility.
The picture below shows an example of a system with one mirrored array and two
free disks.
2
.
Right-click on Mirroring. The popup menu appears.
3.
From the popup menu, click
Rebuild Array
. The NVIDIA Rebuild Array Wizard
appears.