Marantz SR7008 Owner's Manual in English - Page 234

Contents Connections Playback Settings Tips Appendix 22No video is shown on the TV Symptom Cause/Solution Page No picture appears. • Check the connections for all devices. 40, 41, 42, 44, 45, 46, 47, 48, 49, 51, 53, 55, 56, 57 • Insert connection cables all the way in. - • Check that input connectors and output connectors are not reversely connected. - • Check cables for damage. - • Match the input settings to the input connector of the TV connected to this unit. 179 • Check that the proper input source is selected. 60, 149 • Check the video input connector setting. 179 • Check that the resolution of the player corresponds to that of the TV. 207 • Check whether the TV is compatible with copyright protection (HDCP). If connected to a 244 device not compatible with HDCP, video will not be output correctly. • The HDMI signal cannot be converted to an analog signal. Use analog connections. 245 No video is shown on the TV with the • With the DVI-D connection, on some device combinations, devices may not function properly 244 DVI-D connection. due to the copy guard copyright protection (HDCP). No video from an input source such • When special video signals are input from a game console, etc., the video conversion function - as a game console is shown on the may not function. Connect the input connector to the monitor output connector of the same TV. type. While the menu is being displayed, no • When the menu is operated during playback of some 3D video contents or of video at some - video is shown on the TV. computer resolutions (such as VGA), no playback video is shown in the background of the menu. Front panel Display Rear panel 234 Remote Index