Marantz SR7008 Owner's Manual in English - Page 54
Built-in 100BASE-TX switch, Built-in DHCP server
View all Marantz SR7008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Contents Connections Playback % • When using this unit, we recommend you use a router equipped with the following functions: • Built-in DHCP server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. • Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended). • The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise. NOTE • The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details. • This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. • Do not connect an NETWORK connector directly to the LAN port/ Ethernet connector on your computer. Settings Tips Appendix Front panel Display Rear panel 54 Remote Index