Marantz UD5005 UD5005 User Manual - English - Page 14
Connecting to an AV receiver with a digital audio input terminal
View all Marantz UD5005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH Connecting to an AV receiver with a digital audio input terminal • This connection is recommended when the specifications of an AV receiver connected to the unit are as follows: • Not supporting HDMI input • Supporting digital audio(coaxial) input • This connection enables faithfully playing a disc that supports 5.1-channel output. • Select the connector to use and connect the device. Cables used for connections Coaxial digital cable (Sold separately) Audio cable (Black) Audio and Video cable Audio and Video (White) L L cable (Red) R R (Supplied) (Yellow) Component video cable (Sold separately) Video cables (Green) (Blue) (Red) AV receiver AUDIO COAXIAL IN L R VIDEO VIDEO IN COMPONENT VIDEO IN Y PB PR Connecting an AV receiver L R When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, this unit outputs Dolby Digital or DTS bitstream from its digital audio output terminal. NOTE • Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with this connection. When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 4). • Super Audio CD's DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output. • Do not output DTS audio signals to an AV receiver that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers. 10