Miele H 6560 BP Product Manual - Page 102
Installing the oven, handle. The door can be damaged.
View all Miele H 6560 BP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Installing the oven The oven must not be operated until it has been properly installed within cabinetry. The oven must have an adequate supply of cool air for proper operation. The required air must not be heated excessively by other heat sources, e.g. wood burning stove. Observe the following when installing: Build into cabinetry with no back wall. Make sure that the shelf that the appliance sits on does not touch the wall. Do not install insulation strops on the side walls of the cabinet housing. Before installation Before connecting the oven to the power supply, first disconnect the power supply from the oven isolator switch. Mounting the door handle (depending on model) Use the supplied Allen wrench to tighten all four bolts. Installing the oven Connect the power cord to the electrical supply. Do not carry the oven by the door handle. The door can be damaged. Use the handles on each side of the oven to carry it. It is recommended that you remove the door before installing the appliance (see "Cleaning and Care Removing the door") and all oven accessories from the cavity. This will make for easier installation into the niche and will not tempt you to use the handle to carry it. If there are side handles, please remove them. Push the oven into the cabinetry and align it. Open the door (if it was not removed previously). Mount the handle onto the retaining bolts. 102