Miele H 6560 BP Product Manual - Page 85
Delaying the start of the Self Clean program, behind after the Self Clean program
View all Miele H 6560 BP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Cleaning and care As soon as "Timer" is pressed, the buzzer and the flashing indicator will turn off. Delaying the start of the Self Clean program To delay the start of the Self Clean program, select Start Later. Set the time you would like the program to start at. Confirm with OK. The door will lock automatically. The start time set will appear in the display. Start at appears in the display and the start time set. The start or end time can be changed up until the program is ready to start, to do so select Change. As soon as the start time has been reached, the oven heating and the cooling fan will turn on automatically. The duration remaining will appear in the display. At the end of the Self Clean program When the duration remaining reaches 00:00 h, a message will appear in the display to tell you that the door is unlocking. When the door lock has been deactivated: - Program Finished appears in the display, - a buzzer will sound if turned on (see "Settings - Buzzer tones"). Turn the oven off. Acoustic and visual signals are turned off. Burn hazard! Wait until the oven has cooled down before removing any residual soiling left in the oven compartment after the Self Clean program. Wipe any residues (e.g., ash) left behind after the Self Clean program out of the oven compartment and off of any accessories. The amount of ash will vary depending on how dirty the oven was. Most soiling can be easily removed using a clean, soft sponge and a mild solution of warm water and liquid dish soap. Depending on how dirty the oven was prior to cleaning, there may be a visible layer of soiling across the inner glass pane on the door. This should be removed using the scouring side of a dish sponge, a glass scraper, or with a stainless steel scrubbing pad and liquid dish soap. 85