Motorola 8900 User Manual - Page 90
Test Procedure, To Perform the C24 Test
UPC - 845374028836
View all Motorola 8900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Testing a Standalone Unit Test Procedure To Perform the C24 Test Follow the procedure below to perform the C24 test: 1. Verify that the line modem is functioning and communicating with the computer by entering the AT command at in the modem's terminal window This common AT command prompts a properly working modem to reply OK. 2. Verify that the C24 is functioning and communicating with the computer by performing the following AT commands in the C24 terminal window: • ati7-prompts C24 identification The C24 will reply C24 OEM Module. • ati8-prompts the C24 software version 3. Make a CSD call from the C24 to the line modem or the reverse using the atd and ata commands in the appropriate window 4. Verify that a connection between the two modems is established 5. Select any file to transfer between the two modems The file can be any existing file, or a new file created specifically for the test. 6. Send the file either from the C24, or to the C24, through the terminal application using the terminal application's send/receive file options 7. When the file transfer is complete, use the ath command in any of the terminal windows to terminate the call This step completes the test. You can now continue to perform additional tests using the same setup, or change the setup as required. 66 C24 Module Hardware Description December 15, 2008