Motorola LS3408-FZ20005 User Manual - Page 124

9 - 2 Symbol LS3408 Product Reference Guide Connecting a Wand Emulation Interface To perform Wand Emulation, connect the scanner to a portable data terminal, or a controller which collects the wand data and interprets it for the host. Wand port Mobile computer Interface cable Figure 9-1 Wand Emulation Connection NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 9-1 are examples only. The connectors may be different than those illustrated, but the steps to connect the scanner are the same. 1. Connect the modular connector of the Wand Emulation interface cable to the cable interface port on the scanner. See Installing the Interface Cable on page 1-3. 2. Connect the other end of the Wand Emulation interface cable to the wand port on the mobile computer or controller. 3. Ensure all connections are secure. 4. Select the Wand Emulation host type by scanning the appropriate bar code from the Wand Emulation Host Types section on page 9-4. 5. To modify any other parameter options, scan the appropriate bar codes in this chapter. WARNING! Connect the scanner to 5 volt decoders only. Connecting the scanner to a 12 volt decoder can cause damage and invalidate the warranty.