Motorola LS3408-FZ20005 User Manual - Page 155
User-Programmable Supplementals, UPC/EAN/JAN Supplemental Redundancy
View all Motorola LS3408-FZ20005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Symbologies 12 - 11 User-Programmable Supplementals If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on page 12-8, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. Select User-Programmable Supplemental 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page D-1. User-Programmable Supplemental 1 User-Programmable Supplemental 2 UPC/EAN/JAN Supplemental Redundancy With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a symbol without supplementals is decoded before transmission. The range is from two to thirty times. 14 or above is recommended when decoding a mix of UPC/EAN symbols with and without supplementals. The default is 14. Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes from Appendix D, Numeric Bar Codes. Enter a leading zero for single digit numbers. In case of an error, or to change the selection, scan Cancel on page D-3. UPC/EAN/JAN Supplemental Redundancy