Motorola LS3408-FZ20005 User Manual - Page 47
Trigger Mode, Level Trigger, Two Stage - Option 1
View all Motorola LS3408-FZ20005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
User Preferences 4 - 7 Trigger Mode Set the trigger mode using the bar codes below. Level Trigger Upon a trigger pull, an aiming dot appears for a programmable duration of time. After this time, the aiming dot turns into a standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on timeout occurs, a decode occurs, or you release the trigger. If you release the trigger before the aiming duration expires, the laser shuts off and no decode occurs. *Level Two Stage - Option 1 Upon a trigger pull, an aiming dot appears. This aiming dot remains while the trigger is pulled. Releasing the trigger turns the aiming dot into a standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on timeout occurs or a decode occurs. If you pull the trigger again while in a decode session, the scanner beam returns to an aiming dot. Two Stage - Option 1 Two Stage - Option 2 Upon a trigger pull, an aiming dot appears. Releasing the trigger turns off the aiming dot. Pulling the trigger twice in rapid succession turns on the standard laser scanning beam for a full decode session. The laser scanning beam stays on until the laser-on timeout occurs, a decode occurs, or you release the trigger. Two Stage - Option 2