Motorola LS3408-FZ20005 User Manual - Page 27

Scanning 2 - 3 LED Definitions In addition to beeper sequences, the scanner uses the two-color LED to indicate its status. Table 2-2 defines LED colors that display during scanning. Table 2-2 Standard LED Definitions LED Indication Off The scanner is on and ready to scan, or no power is applied to the scanner. Green A bar code was successfully decoded. Red A data transmission error occurred. Scanning in Hand-Held Mode Install and program the scanner (see Setting Up the Scanner on page 1-3). For assistance, contact the local supplier or Motorola Enterprise Mobility Support. 1. Connect the scanner to the host (see the appropriate host chapter). 2. Aim the scanner at the bar code. 3. Press the scan trigger. Figure 2-2 Scanning in Hand-Held Mode 4. Ensure the scan line crosses every bar and space of the symbol. RIGHT WRONG 012345 012345 5. Upon successful decode, the scanner beeps, and the LED turns green. For more information on beeper and LED definitions, see Table 2-1 and Table 2-2.